Argantix KDC 80-62 Manuel d'utilisateur télécharger pdf (Page 109)

Programming Manual

:CONDition Returns the value of the condition register

:ENABle Enables specific bits in the Event register

:EVENt Returns the value of the event register

:INSTrument

:ISUMmary

:CONDition Returns the selected phase’s condition register

:ENABle Enable specific bits in selected phase’s Event register values

:EVENt Returns the selected phase’s event register value

SYSTem:

COMMunicate: Communication settings

GPIB:ADDRess GPIB address, 1 to 31

SERial:

BUAD 9600 | 19200 | 38400 | 57600 | 115200

PARity NONE | EVEN | ODD

BITS 7 | 8

SBITS 1 | 2

CONFigure:

[:BYTE] System configuration query

ERRor? Returns the error number and error string

ETIMe? Elapsed Time query

LOCal Go to local mode

PON Define the power on register number

REMote Go to remote mode

RWLock Local Lockout

TEMPerature Controller temperature query or error state.

VERSion IEEE488.2 version

TRIGger

:ACQuire

[:IMMediate Initiate data acquisition

:SOURce Set the acquire trigger source

:STATe? Return the trigger state (IDLE | WTRIG | BUSY)

[:TRANsient]

[:IMMediate] Initiate transient

:SOURce Sets the trigger source (IMMediate | BUS | EXTernal)

108 KDC Series DC Power Supplies

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 119 120

Pas de commentaire

Argantix KDC 80-62 Manuel d'utilisateur Page 109