Programming Manual
[:LEVEL]
[:AMPLitude]
:POINts
:SLEW
[:RATE] 0.0001 to 1e6 / sec
:POINts
:DWELl
[:TIME] Dwell time in seconds
:POINTs Dwell data point value
:REPeat
[:TIME] Number of time to repeat list data point
:POINTs Repeat data point value
:STEP ONCE | AUTO
:TTLTrig
[:SWITch] 0.0001 to 1e6 / sec
:POINts
:VOLTage
[:LEVEL]
[:AMPLitude]
:POINts
:SLEW
[:RATE] 0.0001 to 1e6 / sec
:POINts
:MODE CVOLtage | CCURrent | CPOWer
:POWer
:PULSE
:COUNt 1 to 2e8
:DCYCle 0 to 100% pulse width must be >= 0.001
:HOLD WIDTh | DCYCle
:PERiod 0.002 to 90,000
:WIDth 0.001 to < 90,000
:VOLTage
[:LEVel]
[:IMMediate]
[:AMPlitude]
[:DC] Set the voltage value in volts. 0 to range
:HIGH Set the maximum voltage allowed. 0 to range
:LOW Set the minimum voltage allowed. 0 to range
:MODE FIXed | STEP | PULSe | LIST
:PROTection
[:LEVel] 0 to 110%
:DELay 0.1 to 5 sec
:MODE RANGe | SVOLtage | ABSolute
:REFerence: INTernal | EXT5V | EXT10V | EXTRES
:SLEW
[:IMMediate] Voltage slew rate in V/sec
:MODE FIXed | STEP | PULSe | LIST
:TRIGger 0 to range
:TRIGgered
[:AMPlitude] 0 to range
STATus
:OPERation
:CONDition Returns the value of the condition register
:ENABle Enables specific bits in the Event register
:EVENt Returns the value of the event register
:QUEStionable
KDC Series DC Power Supplies 107
Commentaires sur ces manuels