Argantix KDC 80-62 Manuel d'utilisateur télécharger pdf (Page 15)

Programming Manual

2.4.3 Installing the Software from CD ROM

The KDCGUI software is distributed on CD-ROM. The KDCGUI must be installed from CD using

the included setup program as all required files are compressed. To install the KDCGUI,

proceed as follows:

1. Turn on the PC and boot up in Windows™

2. Insert the CD in your CD-ROM drive.

3. Run the Setup.exe program from the root directory of the CD.

4. A CD Browser like program will open. Select the product series for which you want

to install the software and select the GUI Software tab. Select an available

operating system (typically 32 bit Windows) and click on the Install button to begin

the installation.

5. Follow the instructions provided by the setup program to complete the installation.

6. When the installation has completed, remove the CD ROM and store in a safe

place.

If prompted to do so, reboot the PC to activate the new settings. You are now ready to start

using the KDCGUI software.

14 KDC Series DC Power Supplies

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 119 120

Pas de commentaire

Argantix KDC 80-62 Manuel d'utilisateur Page 15