Argantix KDC 80-62 Manuel d'utilisateur télécharger pdf (Page 70)

Programming Manual

4.8.3 Status - Instrument Isummary Group

Subsystem Syntax

STATus

:INSTrument

:ISUMmary

:CONDition Returns the selected phase’s condition register

:ENABle Enable specific bits in selected phase’s Event register values

:EVENt Returns the selected phase’s event register value

STATus:INSTrument:ISUMmary:CONDition?

This query returns the value of the Questionable Condition register. The Condition register is a

read-only register which holds the real-time (unlatched) questionable status of the DC power

supply.

Query Syntax STATus:INSTrument:ISUMmary:CONDition?

Example STAT: INST:ISUM:COND?

Returned Parameters <NR1> (Register value)

STATus:INSTrument:ISUMmary:ENABle

This command sets or reads the value of the Questionable Enable register. The Enable register

is a mask for enabling specific bits from the Questionable Event register to set the questionable

summary (QUES) bit of the Status Byte register. This bit (bit 3) is the logical OR of all the

Questionable Event register bits that are enabled by the Questionable Status Enable register.

Command Syntax STATus:INSTrument:ISUMmary:ENABle <NRf+>

Parameters 0 to 32767

*RST Value 0

Examples STAT:INST:ISUM:ENAB 18

Query Syntax STATus:INSTrument:ISUMmary:ENABle?

Returned Parameters <NR1> (Register value)

STATus:INSTrument:ISUMmary:EVENt?

This query returns the value of the Questionable Event register. The Event register is a read-

only register, which holds (latches) all events. Reading the Questionable Event register clears it.

Query Syntax STATus:INSTrument:ISUMmary:EVENt? \:EVENt?

Parameters None

Returned Parameters <NR1>(Register Value)

Examples STAT:INST:ISUM:EVEN?

Related Commands *CLS STAT:INST:ISUM:NTR STAT:INST:ISUM:PTR

KDC Series DC Power Supplies 69

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 119 120

Pas de commentaire

Argantix KDC 80-62 Manuel d'utilisateur Page 70