Argantix KDC 80-62 Manuel d'utilisateur télécharger pdf (Page 19)

Programming Manual

2.6 Trouble Shooting - IEEE-488 / GPIB

This section provides guidelines for resolving communication problems that may occur when

using the KDC series with or without the KDCGUI software with a IEEE-488 / GPIB interface.

Symptoms:

1. Unable to verify connection to the power supply through IEEE-488 interface. Time-out

occurs any time an attempt is made to verify connection.

Things to check:

1. Is the interface option set to use the IEEE-488 interface instead of the RS232C interface?

2. Does the bus address selected in the configuration menu of the KDC supply match the

address selected in the System, Interface dialog windows?

3. Did you connect the cable in correctly and are both ends of the GPIB cable securely tied

down?

2.7 Software Registration

Updates of this and other Argantix programs are posted on a regular basis on the Argantix web

site. You can find available programs by selecting the Software, GUI's and Drivers menu. To

gain access to these downloads, you will need to register as a user on our web site. For

instructions on how to register and request the required access level for software downloads,

visit our web site at

www.argantix.com

18 KDC Series DC Power Supplies

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 119 120

Pas de commentaire

Argantix KDC 80-62 Manuel d'utilisateur Page 19